The power outlets can be used for a following component.
12 V: Accessories that run on less than 10 A 120 V AC: Accessories that use less than 100 W
12V: The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode.
120V:The “ENGINE START STOP” switch is in IGNITION ON mode.
You may be unable to use the USB port if a device is connected to the instrument panel power outlet at the same time.
Close the power outlet lid when not in use.
Foreign objects or liquids that enter the power outlet may cause a short circuit.
12V: Do not use an accessory that uses more than 12V/10A.
120V: Do not use a 120V AC appliance that requires more than 100W.
If a 120V AC appliance that consumes more than 100W is used, the protection circuit will cut the power supply.
Do not use the power outlet longer than necessary when the engine is not running.
The following 120V AC appliances may not operate even if their power consumption is under 100W.