Toyota Land Cruiser

 Service Manual

Suspension & Axle
Rear wheel hub bolt

REPLACEMENT

1. REMOVE REAR WHEEL

2. REMOVE BRAKE CALIPER AND DISC

(a) Remove the 2 bolts, brake caliper and disc.

(b) Support the brake caliper securely.

3. REMOVE HUB BOLT

Using a brass bar and hammer, remove the hub bolt.

4. INSTALL HUB BOLT

Install a washer and nut to a new hub bolt, as shown in the illustration, and install the hub bolt by torquing the nut.

5. INSTALL DISC AND BRAKE CALIPER

Install the disc and brake caliper with the 2 bolts.

Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)

6. INSTALL REAR WHEEL

Torque: 131 N·m (1,340 kgf·cm, 97 ft·lbf)

Coil spring and rear shock absorber

Differential locking system

Front axle hub

Front differential carrier

Front drive shaft

Front differential side gear shaft oil seal

Front lower suspension ARM

Front shock absorber

Front stabilizer bar

Front torsion bar spring

Front upper suspension ARM

Front wheel alignment

Front wheel hub bolt

Rear axle shaft

Rear differential carrier

Rear differential carrier (w/ Diff. Lock)

Rear differential carrier (w/ LSD)

Rear differential front oil seal

Rear lateral control rod

Rear stabilizer bar

Rear upper and lower control ARM

Rear wheel hub bolt

Steering knuckle

Tire and wheel

Troubleshooting