Toyota
Toyota Land Cruiser
 Service Manual
Suspension & Axle Steering knuckle
Removal

1. REMOVE FRONT AXLE HUB (SA-12 )

2. REMOVE OIL SEAL, GASKET AND DUST COVER

Remove the 4 bolts, oil seal, gasket and dust cover.

Remove the 4 bolts, oil seal, gasket and dust cover.

3. DISCONNECT ABS SPEED SENSOR AND WIRE HARNESS

Remove the 3 bolts and disconnect the ABS speed sensor and

Remove the 3 bolts and disconnect the ABS speed sensor and wire harness.

4. DISCONNECT TIE ROD END FROM STEERING KNUCKLE ARM

(a) Remove the cotter pin and nut.

(b) Using SST, disconnect the tie rod end from the steering

(b) Using SST, disconnect the tie rod end from the steering knuckle arm.

SST 09628-6201 1

5. DISCONNECT LOWER SUSPENSION ARM FROM STEERING KNUCKLE

(a) Remove the cotter pin and nut.

(b) Using SST, disconnect the lower suspension arm from the

(b) Using SST, disconnect the lower suspension arm from the steering knuckle.

SST 09628-6201 1

6. REMOVE STEERING KNUCKLE

(a) Remove the cotter pin and nut.

(b) Temporarily install the nut to the lower suspension arm.

(c) Using SST, disconnect the steering knuckle from the upper

(c) Using SST, disconnect the steering knuckle from the upper suspension arm.

SST 09628-6201 1

(d) Remove the nut and steering knuckle from the lower suspension arm.

    More about Steering knuckle:

    Disassembly

    Installation

    Reassembly

    Removal

    Toyota Land Cruiser Service Manual / Suspension & Axle / Steering knuckle / Removal

    Toyota Land Cruiser Service Manual

    Categories


    2011-2019 Copyright www.tlacruiser.com