Toyota
Toyota Land Cruiser
 Service Manual
Suspension & Axle Steering knuckle
Reassembly

1. INSTALL BEARING AND BUSHING

(a) Using SST and a press, install a new bearing and bushing.

(a) Using SST and a press, install a new bearing and bushing.

SST 09950-60010 (09951-00540), 09950-70010 (09951-07100)

(b) Apply synthetic oil and lithium soap base chassis grease, NLGI No. 1 to the steering knuckle inner side of the bushing.

2. INSTALL OIL SEAL

(a) Using SST and a press, install a new oil seal.

(a) Using SST and a press, install a new oil seal.

SST 09950-60020 (09951-00910), 09950-70010 (09951-07100)

(b) Coat the lip of the oil seal with MP grease.

3. INSTALL STEERING KNUCKLE ARM

(a) Clean the threads of the 2 bolts and steering knuckle with toluene or trichloroethylene.

(b) Apply sealant to the bolt threads.

Sealant: Part No. 08833-00070, THREE BOND 1324 or equivalent

(c) Install the steering knuckle arm with the 2 bolts.

Torque: 147 N·m (1,500 kgf·cm, 108 ft·lbf)

    More about Steering knuckle:

    Disassembly

    Installation

    Reassembly

    Removal

    Toyota Land Cruiser Service Manual / Suspension & Axle / Steering knuckle / Reassembly

    Toyota Land Cruiser Service Manual

    Categories


    2011-2018 Copyright www.tlacruiser.com