Toyota
Toyota Land Cruiser
 Service Manual
Brake
Parking brake lever

ON-VEHICLE INSPECTION

1. CHECK PARKING BRAKE LEVER TRAVEL

Pull the parking brake lever all the way up, and count the number of clicks.

Parking brake lever travel at 196 N (20 kgf, 44 lbf): 4 - 6 clicks

If incorrect, adjust the parking brake.

2. IF NECESSARY, ADJUST PARKING BRAKE

HINT:

HINT: Before adjusting the parking brake, make sure that the rear brake shoe clearance has been adjusted. For shoe clearance adjustment  BR-38 .

(a) Loosen the lock nut and turn the turn backle until the lever travel is correct.

(b) Tighten the lock nut.

Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf)

3. CHECK BELLCRANK

(a) Check that the adjusting bolt on the bellcrank is not apart

(a) Check that the adjusting bolt on the bellcrank is not apart from the backing plate.

(b) When the adjusting bolt on the bellcrank is apart from the backing plate adjust the parking brake cable once again.

    More about Brake:

    Brake fluid

    Brake pedal

    Brake system

    Front brake caliper

    Front brake pad

    Front speed sensor

    Hydraulic brake booster

    Proportioning and By-pass valve (P & B valve)

    Parking brake

    Parking brake lever

    Rear brake caliper

    Disassembly

    Rear brake pad

    Rear speed sensor

    Troubleshooting

    Toyota Land Cruiser Service Manual / Brake / Parking brake lever

    Toyota Land Cruiser Service Manual

    Categories


    2011-2018 Copyright www.tlacruiser.com