Toyota Land Cruiser
Service Manual
Transfer » Rear extension housing
Inspection

1. INSPECT DRIVEN ROTOR BODY CLEARANCE

(a) Install the drive rotor and driven rotor to the rear extension

(a) Install the drive rotor and driven rotor to the rear extension housing.

(b) Using a feeler gauge, measure the body clearance between the drive rotor and extension housing.

Standard clearance: 0.08 - 0.17 mm (0.0031 - 0.0067 in.) Maximum clearance: 0.17 mm (0.0067 in.)

If the body clearance exceeds the maximum, replace the drive rotor and driven rotor.

2. INSPECT DRIVEN ROTOR TIP CLEARANCE

Using a feeler gauge, measure the tip clearance between the

Using a feeler gauge, measure the tip clearance between the drive rotor and driven rotor.

Standard clearance: 0.05 - 0.15 mm (0.0020 - 0.0059 in.) Maximum clearance: 0.15 mm (0.0059 in.)

If the tip clearance exceeds the maximum, replace the drive rotor and driven rotor.

3. INSPECT OIL PUMP SIDE CLEARANCE

Using a steel straight edge and feeler gauge, measure the side

Using a steel straight edge and feeler gauge, measure the side clearance of oil pump.

Standard clearance: 0.03 - 0.10 mm (0.0012 - 0.0039 in.) Maximum clearance: 0.10 mm (0.0039 in.)

If the side clearance exceeds the maximum, replace the drive rotor and driven rotor.

More about «Rear extension housing»:

Disassembly