Toyota Land Cruiser

 Service Manual

Air conditioning » Blower unit
Disassembly

1. REMOVE AIR INLET SERVOMOTOR

Remove the 3 screws and the air inlet servomotor.

2. REMOVE BLOWER MOTOR CONTROL RELAY

(a) Disconnect the connector.

(b) Remove the screw and the blower motor control relay.

3. REMOVE BLOWER MOTOR

(a) Disconnect the connector.

(b) Remove the 3 screws and the blower motor.

4. REMOVE WIRE HARNESS

Remove the screw and the wire harness.

INSPECTION

1. INSPECT AIR INLET SERVOMOTOR OPERATION (DI-1357 )

2. INSPECT AIR INLET DAMPER POSITION SENSOR CIRCUIT (DI-1348 )

INSTALLATION

Installation is in the reverse of removal (AC-55 ).

REASSEMBLY

Reassembly is in the reverse of disassembly (AC-56 ).

Disassembly

Removal