If equipped with Adaptive Cruise Control (ACC), it allows for selecting the cruise control set speed and following gap. Read this entire section before using this system.
ACC uses a radar sensor to detect other vehicles. The following gap is the following time (or distance) between your vehicle and a vehicle detected directly ahead in your path, moving in the same direction. If no vehicle is detected in your path, ACC works like regular cruise control.
If a vehicle is detected in your path, ACC can speed up the vehicle or apply limited, moderate braking to maintain the selected following gap.
To disengage ACC, apply the brake.
If the Traction Control System (TCS) or StabiliTrak electronic stability control system activates while ACC is engaged, ACC may automatically disengage. When road conditions allow ACC to be safely used, ACC can be turned back on. ACC will not engage if the TCS or StabiliTrak electronic stability control system is disabled.
Warning: ACC has limited braking ability and may not have time to slow the vehicle down enough to avoid a collision with another vehicle you are following. This can occur when vehicles suddenly slow or stop ahead, or enter your lane.
Also see "Alerting the Driver" in this section. Complete attention is always required while driving and you should be ready to take action and apply the brakes.
Warning: ACC will not detect or brake for children, pedestrians, animals, or other objects.
Do not use ACC when:
The system may not detect a vehicle ahead. Keep the entire front of the vehicle clean.
: Press to turn the system on or off. The indicator turns white on the instrument cluster when ACC is turned on.
RES+ : Press the control up briefly to make the vehicle resume to a previously set speed, or hold upward to accelerate. If cruise control is already engaged, use to increase vehicle speed.
SET- : Press the control down briefly to set the speed and activate cruise control. If cruise control is already engaged, use to decrease vehicle speed.
: Press to disengage ACC without erasing the selected set speed.
: Press to select a following gap time (or distance) setting for ACC of Far, Medium, or Near.
The speedometer reading can be displayed in either English or metric units. The increment value used depends on the units displayed.