Toyota
Toyota Land Cruiser
 Service Manual
Charging » Generator
Replacement

1. REPLACE FRONT BEARING

(a) Remove the 4 screws, bearing retainer and bearing.

(a) Remove the 4 screws, bearing retainer and bearing.

(b) Using SST and a hammer, tap out the bearing.

(b) Using SST and a hammer, tap out the bearing.

SST 09950- 60010 (09951- 00250), 09950- 70010 (09951-07100)

(c) Using SST and a press, press in a new bearing.

(c) Using SST and a press, press in a new bearing.

SST 09950- 60010 (09951- 00470), 09950- 70010 (09951-07100)

(d) Install the bearing retainer with the 4 screws.

Torque: 2.6 N·m (27 kgf·cm, 23 in.·lbf)

2. REPLACE REAR BEARING

(a) Using SST, remove the bearing cover (outside) and bearing.

(a) Using SST, remove the bearing cover (outside) and bearing.

SST 09820-00021

NOTICE: Be careful not to damage the fan.

(b) Using SST and a press, press in a new bearing.

(b) Using SST and a press, press in a new bearing.

SST 09820-00031

(c) Using SST, push in the bearing cover (outside).

(c) Using SST, push in the bearing cover (outside).

SST 09285-76010

    More about «Generator»:

    Disassembly

    Inspection

    Installation

    Reassembly

    Removal

    Replacement

    Toyota Land Cruiser Service Manual / Charging / Generator / Replacement

    Toyota Land Cruiser Service Manual

    Categories


    © 2011-2024 Copyright www.tlacruiser.com