1. REMOVE WIPER ARMS
(a) Remove the 2 caps and 2 nuts.
(b) Remove the 2 wiper arms.
2. REMOVE HOOD TO COWL TOP SEAL
3. REMOVE COWL TOP VENTILATOR LOUVERS
(a) Remove the cowl top ventilator louver RH.
(b) Remove the cowl top ventilator louver LH.
4. REMOVE WIPER MOTOR
(a) Disconnect the connector, unfasten the 4 bolts.
(b) Disconnect the wiper motor from the wiper link, then remove the wiper motor.
5. REMOVE WIPER LINK
(a) Loosen the 6 bolts.
(b) Remove the wiper link through the service hole
6. REMOVE WASHER NOZZLE
(a) Disconnect the washer hose.
(b) Using a screwdriver, remove the washer nozzle.
HINT: Tape the screwdriver tip before use.
(c) Employ the same manner described above to the other side.