Toyota Land Cruiser

 Service Manual

Body Mechanical » Front seat
Reassembly

1. Driver's Side: INSTALL SEAT POSITION SENSOR

 

Install the seat position sensor with a new bolt, then connect the connector.

Part No.:

Bolt: 90119-06871

Torque: 8.0 N·m (82 kgf·cm, 71 in.·lbf)

2. INSTALL SEAT POSITION CONTROL RELAY

Install the seat position control relay with the 2 bolts, then connect the connectors.

Torque: 5.5 N·m (56 kgf·cm, 49 in.·lbf)

3. INSTALL SEATBACK COVER

Install the seatback cover to the seatback pad with new hog rings.

4. INSTALL LUMBER SUPPORT

Install the lumber support and the spacer with the 2 bolts.

5. w/o Side Airbag: INSTALL SEATBACK FRAME

(a) Install the seatback cover to the seatback frame.

(b) Install new hog rings.

(c) Install the 2 headrest supports.

6. w/ Side Airbag: INSTALL SEATBACK FRAME

(a) Install the seatback cover to the seatback frame.

(b) Install new hog rings, the clamps and the 2 bolts.

Torque: 4.7 N·m (48 kgf·cm, 42 in.·lbf)

(c) Install the 2 headrest supports.

7. INSTALL SEATBACK ASSEMBLY

(a) w/o Side Airbag: Install the RH reclining adjuster inside shield with a screw.

(b) w/ Side Airbag: Place the airbag connector along the inner seat adjuster, and then install the RH reclining adjuster inside shield with a screw so that the connector is placed in between.

NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness.

(c) Install the LH reclining adjuster inside shield with a screw.

(d) Install the seatback assembly with the 4 bolts.

Torque: 43 N·m (440 kgf·cm, 32 ft·lbf)

(e) Install new hog rings.

(f) Hang the hook.

(g) Connect the connectors.

8. INSTALL ARMREST

Torque: 37 N·m (380 kgf·cm, 27 ft·lbf)

9. INSTALL HEADREST

10. INSTALL SEAT CUSHION COVER ( BO-1 10)

11. INSTALL SEAT CUSHION FRAME

(a) Install the seat cushion frame with new hog rings to the seat cushion cover with pad.

(b) Hang the hook.

12. INSTALL SEAT CUSHION ASSEMBLY

(a) Install the seat cushion assembly with the 4 bolts to the seat adjuster.

Torque: 21 N·m (210 kgf·cm, 15 ft·lbf)

(b) Engage the wire harness clamp.

13. INSTALL FRONT SEAT CUSHION SHIELD

Install the seat cushion shield with the screw.

14. INSTALL LOWER SEAT CUSHION SHIELD

Install the seat cushion shield with the screw.

15. INSTALL SEAT CUSHION INNER SHIELD

Install the seat cushion inner shield with the 3 screws.

16. INSTALL FRONT SEAT INNER BELT

(a) Engage the clamp, then connect the connector.

(b) Install the inner belt with the bolt.

Torque: 42 N·m (430 kgf·cm, 31 ft·lbf)

17. INSTALL SEAT CUSHION OUTER SHIELD

(a) Install the power seat switch with the 3 screws.

(b) Install the lumber support switch with the 2 screws.

(c) Connect the connectors as shown in the illustration.

(d) Install the seat cushion outer shield with the 4 screws.

(e) Install the power seat switch knobs.

18. INSTALL SEATBACK BOARD

Disassembly

Reassembly

Removal

Replacement