Toyota Land Cruiser

 Owners Manual

Before driving » Opening and closing the windows and moon roof
Power windows

The power windows can be opened and closed using the following switches.

1. Closing
2. One-touch closing*
3. Opening
4. One-touch opening*

*:To stop the window partway, operate the switch in the opposite direction.

Lock switch

Press the switch down to lock passenger window switches.

Use this switch to prevent children from accidentally opening or closing a passenger window.

• The power windows can be operated when

The “ENGINE START STOP” switch is in IGNITION ON mode.

• Door lock linked window operation

The following functions can be used if customized at your Toyota dealer.

• The power windows can be opened and closed using the mechanical key. (, 653)
• The power windows can be opened using the wireless remote control.
• The power windows can be closed using the smart key system.

• Operating the power windows after turning the “ENGINE START STOP” switch OFF

The power windows can be operated for approximately 45 seconds even after the “ENGINE START STOP” switch is turned ACCESSORY mode or turned OFF. They cannot, however, be operated once the driver’s or front passenger’s door is opened.

• Jam protection function

If an object becomes caught between the window and the window frame, window travel is stopped and the window is opened slightly.

• When the power window does not close normally

If the jam protection function is operating abnormally and a window cannot be closed, perform the following operations using the power window switch on the relevant door.

• After stopping the vehicle, the window can be closed by holding the power window switch in the one-touch closing position while the “ENGINE START STOP” switch is turned to IGNITION ON mode.
• If the window still cannot be closed even by carrying out the operation explained above, initialize the function by performing the following procedure.

STEP 1

Hold the power window switch in the one-touch closing position.

Continue holding the switch for a further 6 seconds after the window has closed.

STEP 2

Hold the power window switch in the one-touch opening position.

Continue holding the switch for a further 2 seconds after the window has opened completely.

STEP 3

Hold the power window switch in the one-touch closing position once again. Continue holding the switch for a further 2 seconds after the window has closed.

If you release the switch while the window is moving, start again from the beginning. If the window continues to close but then re-open slightly even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer.

• Customization

Settings (e.g. linked door lock operation) can be changed.

(Customizable features )

Power windows

Moon roof