Toyota Land Cruiser

 Service Manual

Automatic Transmission » Park/neutral position (PNP) switch
On-vehicle repair

1. REMOVE ENGINE NO. 2 UNDER COVER

2. DISCONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR

3. REMOVE PARK/NEUTRAL POSITION SWITCH

(a) Pry off the lock washer and remove the nut.

(b) Remove the bolt and park/neutral position switch.

4. INSTALL PARK/NEUTRAL POSITION SWITCH

(a) Install the park/neutral position switch with the bolt.

Torque: 13 N·m (130 kgf·cm, 9 ft·lbf)

(b) Install a new lock washer and the nut.

Torque: 6.9 N·m (70 kgf·cm, 62 in.·lbf)

(c) Bent the claws on the lock washer to stake the nut.

(d) Adjust the park/neutral position switch ( DI-361 ).

5. CONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR

6. INSTALL ENGINE NO. 2 UNDER COVER

On-vehicle repair

Inspection