INSPECT LOWER SUSPENSION ARM BALL JOINT FOR ROTATION CONDITION
(a) As shown in the illustration, flip the ball joint stud back and forth 5 times, before installing the nut.
(b) Using a torque wrench, turn the nut continuously one turn per 3 - 5 seconds and take the torque reading on the 5th turn.
Turning torque: 0.29 - 2.94 NÂ·m (3 - 30 kgfÂ·cm, 2.6 - 26 in.Â·lbf)
Installation is in the reverse order of removal (SA-75 ).
HINT: After installation, check the front wheel alignment (SA-6 ).