Toyota Land Cruiser

 Service Manual

Body Mechanical » Instrument panel
Disassembly

1. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT

2. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT

3. REMOVE DEFROSTER NOZZLE

4. REMOVE CENTER BRACKET

5. REMOVE NO. 1 HEATER TO REGISTER DUCT

6. REMOVE INSTRUMENT PANEL WIRE HARNESS

7. REMOVE NO. 5 HEATER TO REGISTER DUCT

8. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY

Remove the 3 nuts and the front passenger airbag assembly.

Torque: 6.0 N·m (61 kgf·cm, 53 in.·lbf)

CAUTION:

• Do not store the front passenger airbag assembly with the airbag deployment side facing down.
• Never disassemble the front passenger airbag assembly.

NOTICE: At the time of reassembly, please refer to the following items.

• Make sure that the front passenger airbag assembly is installed with the specified torque.
• If the front passenger airbag assembly has been dropped, or if there are cracks, dents or other defects in the case or the connector, replace the front passenger airbag assembly with a new one.
• When installing the front passenger airbag assembly, take care that the wiring does not interfere with other parts and is not pinched between other parts.

9. REMOVE NO. 1 REGISTER

10. REMOVE NO. 4 REGISTER

Components

Disassembly

Installation

Removal