Toyota
Toyota Land Cruiser
 Service Manual
Automatic Transmission
ATF temperature sensor

On-vehicle repair

1. REMOVE ENGINE NO.2 UNDER COVER

2. DRAIN ATF

3. REMOVE OIL PAN ( AT-1 1)

4. REMOVE OIL STRAINER ( AT-1 1)

5. REMOVE ATF TEMPERATURE SENSOR

(a) Disconnect the 7 solenoid valve connectors.

(a) Disconnect the 7 solenoid valve connectors.

(b) Remove the 2 bolts and disconnect the 2 ATF temperature sensors.

(c) Disconnect the solenoid connector.

(c) Disconnect the solenoid connector.

(d) Remove the bolt and the transmission wire harness.

6. INSTALL ATF TEMPERATURE SENSOR

(a) Install the transmission wire harness.

(b) Install the bolt.

Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf)

(c) Connect the solenoid connector.

(d) Connect the 7 solenoid valve connectors.

(d) Connect the 7 solenoid valve connectors.

(e) Connect the 2 ATF temperature sensors with the 2 bolts.

Torque:
A: 11 N·m (112 kgf·cm, 8 ft·lbf) B: 10 N·m (100 kgf·cm, 7 ft·lbf)

Bolt length: Bolt A: 36 mm (1.42 in.) Bolt B: 12 mm (0.47 in.)

Sensor wire harness:

7. INSTALL OIL STRAINER ( AT-8 )

7. INSTALL OIL STRAINER ( AT-8 )

8. INSTALL OIL PAN ( AT-8 )

9. FILL ATF AND CHECK ATF LEVEL ( AT-3-1 )

10. INSTALL ENGINE NO.2 UNDER COVER

    More about Automatic Transmission:

    Air cooled oil cooler

    ATF temperature sensor

    Automatic transmission system

    Automatic transmission unit

    Floor shift assembly

    Parking lock pawl

    Park/neutral position (PNP) switch

    Torque converter clutch and drive plate

    Valve body assembly

    Vehicle speed sensor

    Toyota Land Cruiser Service Manual / Automatic Transmission / ATF temperature sensor

    Toyota Land Cruiser Service Manual

    Categories


    2011-2018 Copyright www.tlacruiser.com